Jbl CLUB 600AM 600-Watt @ 2 Ohms Monoblock Class D Subwoofer Amplifier with Remote Level Control
Similar Products
Products of same category from the store
All
Product info
Value engineered car amplifier with JBL power and performance The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system even one using your cars factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure while a phase switch ensures that the bass will blend well with your full-range speakers. Features Compact size High and low level input Variable crossover and bass boost Low noise and distortion Input Level Control Full on-board protection Phase Switch RBC wired remote Compact size The JBL Club A600 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited. High and low level input Speaker-level and low-level inputs allow the Club A600 to integrate with both aftermarket and factory car stereo systems. Variable crossover and bass boost Unlike many amplifiers available at similar prices the JBL Club A600 features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance. Low noise and distortion The Club A600 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise. Input Level Control When low-level inputs are used this control adjusts the input sensitivity between 200mVrms and 2.0Vrms. When high-level inputs are used this control adjusts the input sensitivity between 2Vrms and 20Vrms. Full on-board protection On-board circuitry protects the Club A600 from shorts high-temperature overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists. Phase Switch This switch changes the input phase to inverted or non-inverted. This is especially helpful as part of system tuning based on the enclosure type and location in the vehicle. RBC wired remote The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from drivers seat. Class D amp technology The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Turn-on mode This switch changes DC to REM to adapt with low-level signals or high-level signals this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable Turn-on mode can protect to avoid current drain when you dont expect to turn on your amplifier. What's in the Box One Club A600 mono subwoofer car amplifier Four 30A ATO fuses (2 installed 2 spare) 2 Bare wire-to-RCA adapters Remote bass control module 16.5' Remote control cable (RJ-25 plugs on both ends) 2 Self-tapping screws for remote (M3 x 15mm) 4 Mounting screws (M4 x 53mm) Owners Manual Two JBL stickers 1 logo badage Specifications Mono subwoofer car amplifier 350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) Class D amp technology Variable low-pass filter (32320 Hz 12 dB/octave) Variable bass boost (0-12dB at 45Hz) Phase switch (0 180 degrees) Preamp and speaker-level inputs Fuse rating: 30A x 2 8-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions (W x H x D) = 8-11/16" x 2-1/16" x 7-1/8"
Price History
Price Archive shows prices from various stores, lets you see history and find the cheapest. There is no actual sale on the website. For all support, inquiry and suggestion messagescommunication@pricearchive.us